Description
Roemheld Threaded-Body Cylinders-Mini
7250 psi max
Single Acting
Tiny push clamps with a solid plunger. Threaded-body clamps provide considerable force in a small size. These small clamps can be placed very close together, especially when manifold mounted (.60″ minimum spacing). Clamps can be screwed all the way down to their hex flats, or installed at partial depth.
Clamping Action
Applying fluid pressure advances the plunger. Spring return.
Optional Extended Piston Rod
Design Considerations
Threaded-Body Push Clamps have a positive stroke stop in extended position, but not in retracted position. Do place a load on the plunger while retracted.
Mounting Fluid Supply
Several possible mounting methods:
1) install clamp directly into a flat-bottom tapped hole in the fixture. 2) install clamp into a Mounting Block;
3) install clamp into a Feeder Cap and mount through a fixture wall (secure with a Jam Nut);
4) install in a plain tapped hole and secure with a Sealing Nut. In the first three cases, hydraulic sealing is accomplished by a Sealing Washer (furnished) placed directly underneath the clamp.
Material
| Item | Material | Heat Treat | Finish |
| Plunger | Steel | – | Case Hardened |
| Body | Steel | – | Black Oxide |
| Sealing Washer | Derlin | – | – |
Parts Specification
| Maximum Clamping Force (lbs) | Maximum Clamping Force (kn) | Body Thread (Inch) | Version | Stroke (mm) | Overall Height (mm) | Piston Rod Diameter (mm) | Piston Rod Extension When Retracted (mm) |
| 560 lbs. | 2.5 kN | 1/2-20 “ | Long Stroke | 10mm | 41mm | 5mm | Nonemm |
Reviews
There are no reviews yet.