Roemheld CLR-400-F | 5/16″ Tubing OD Size Steel Tube End – All Industrial Tool Supply

Description

Roemheld Tube End 37-Degree Flare

CLR-400-F. This standard nut-and-sleeve assembly is used at the end of every piece of flared tubing to mate with a standard male JIC 37 end. Must be placed on the tube before flaring is completed.JIC-standard 37 fittings accept The standard 5/16″ O.D. tubing (cut off straight, deburred, and flared) as well as Fixture Hose and Heavy-Duty Hose with 37-flare swivel nuts. When using tubing, a Tube End fitting (CLR-400-F), consisting of a nut and sleeve, must be placed on each tube end before flaring is completed.

Application Information

Design Considerations Safety Precautions

7250 psi maximum operating pressure. Use these fittings only with The standard steel tubing and hydraulic hose. The standard tubing is 5/16″ O.D. seamless heavy-wall tubing, C1010 steel, cold drawn, fully annealed, 0.065″ wall thickness, 22,800 psi minimum burst pressure.